[Elecraft] K3 - AFSK anamoly? No replies, try again

[Don Wilhelm]

Mike,

If you do find it is AGC that is producing that 'unwanted sideband' 
response, you may want to investigate your AGC slope and threshold settings.
To give you some guidance, look at my webpage www.w3fpr.com article on 
"Noisy K3".  I would suggest that you set those AGC parameters in CW or 
SSB mode to suit your preferences.

73,
Don W3FPR

On 1/6/2016 7:43 PM, Lyle Johnson wrote:
> Mike,
>
> It could be that the band is quiet, this is a strong signal (S7 or 
> more) and as you tune through to the opposite sideband the AGC is 
> kicking up the gain so you hear the signal down some 70 dB or so, but 
> if it is a strong signal on an otherwise fairly quiet band, you may 
> hear it.
>
> 73,
>
> Lyle KK7P
>
> On 1/6/16 4:47 PM, Mike Murray wrote:
>> Bob, Joe, Bill & Mike,
>>
>> Since I'm new to RTTY, I probably didn't describe my question in correct
>> terminology - I mainly only operate CW.  I'll try again....
>>