[Elecraft] KIO3B Audio Spec

[Ray Sills]

I’m not so sure about that.  The various devices are only connected to one other object.  Think of this picture:

A is connect to B, and B is connected to C.  So, you want to bond A to B.. and don’t care about the connection to C, since it needs only be connected to B and not C.  And the same for B to C.   The “star” approach means that the connection from A goes to a common point, and then from the common point to B, creating two additional connection points, for a total of 4, whereas, the A to B connection is just 2 points.

The “star” is fine for safety, but does nothing to assist with the common mode between devices A and B or B and C.  And, we are talking about audio, not safety commons.

73 de Ray
K2ULR
KX3 #211



> On Dec 31, 2015, at 9:11 PM, Doug Person via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> I've always believed in the star approach and completely agree with the series circuit issue.
> 
> 73, Doug -- K0DXV
>