[Elecraft] [K3] microphone question

[Don Wilhelm]

Kenwood dynamic microphones will work fine in the K2 - just turn the 
bias off.
Use the 600 impedance setting.  The 50k is for tube mic preamp inputs.

73,
Don W3FPR

On 2/27/2016 1:14 PM, David Christ wrote:
> I came into possession of a Kenwood MC-50 Dynamic mike in the original box but probably not NOS.
>
> Is this a suitable mike for the K3?
>
> If so:
>
> Is it better to use it at 600 or 50K impedance?
>
>