[Elecraft] New P3 command and Macros...

[Vic Rosenthal 4X6GP/K2VCO]

It looks like you are setting the span to 6 kHz. Then what exactly does 
#RCF +002500 do?

I'm thinking this only works in tracking mode, not fixed mode -- correct?

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 27 Feb 2016 21:09, Dave Cole wrote:
> A new command will be incorporated into the next P3 software release--
> RCF.
>
> This new command allows one to move the P3 CENTER frequency around on
> the P3 screen, via relative moves, as opposed to the current absolute
> moves now available....  What can this do for you?
>
> In the macro below:
>
> SWT13;SWT13;FT1;UPB7;RT0;XT0;#SPN000060;#RCF+002500;
>
> The K3 is placed in SPLIT 5 KHZ up mode, and the P3 is placed into a
> mode where the receive frequency is on the left edge of the P3 screen,
> showing the pileup on the right in the above 5 KHz.
>
> This allows you to see all stations you can hear who are transmitting
> up 5 from your target station.  You can then place your transmit
> frequency into the empty spots where no one is transmitting, that you
> can see, above a DX station using VFO B.
>
> I have updated the spreadsheet at: http://nk7z.net/adding-an-external-k
> eypad-to-the-k3/ to include the above macro.  I have also updated the
> CLEAR SPLIT macro in the spreadsheet to clear the split, and return the
> P3 to center.  I have tested this with the Genovation Keypad, and it
> works like a charm...
>
> Many thanks to Elecraft for taking the time to listen to input from the
> users, and for adding a command to allow this...  I honestly can say, I
> know of no other company, which listens to the users and actually does
> something as a result of listening to users other than Elecraft...  I
> am amazed at the customer service from Elecraft...
>
> THANK YOU AGAIN for this level of support Elecraft.
>