[Elecraft] K3 transmit out of band question

[David Anderson]

Still not got a definitive answer to my question, which I repeat:

K3 - Do I require the general coverage bandpass filter option to allow transmission just for an extra 50 kHz above 14.350?  ( provided the radio is unlocked for transmit beyond the ham bands).


73 from David GM4JJJ

> On 24 Feb 2016, at 14:24, David Anderson <gm4jjj at yahoo.co.uk> wrote:
> 
> I am hoping to use a K3 to transverter from 14 MHz to 144 MHz with an existing transverter.
> 
> I need to cover from 14.000 to about 14.400 MHz on transmit for the weak signal end of the band.
> 
> I believe that the K3 can be enabled via software to transmit outside the limits of the ham bands. 
> 
> The question is do I require the general coverage bandpass filter option to allow transmission just for that extra 50 kHz above 14.350? 
> 
> I will be using the transverter output not the HF antenna for this.
> 
> Many thanks.
> 
> 73 from David GM4JJJ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gm4jjj at yahoo.co.uk