[Elecraft] K3 RX EQ Settings

[Don Wilhelm]

Doug,

This is not a question where there is a 'best' setting for everyone - it 
all depends.

Your RX EQ settings will have to be customized to your ears and the 
listening devices you typically use (headphones, speakers, etc.).
I just leave mine set flat for both SSB and CW.  Make it sound 'natural' 
to your ears.

For the SSB Lo and Hi cut points, I generally start out with 200 to 300 
Hz as the lo  cut point, and 2800 to 3000 for the high cut point.
If I find interference on the high frequency side, it is an easy matter 
to reduce the hi cut, and you will be surprised how much it can be cut 
while still maintaining intelligibility.  Interference on the low 
frequency side is more difficult to combat since you will lose 
significant intelligibility if you increase the low cut significantly.

With the NR settings, you will have to experiment.  It will depend on 
the type of noise you are trying to deal with.

73,
Don W3FPR

On 2/24/2016 6:29 PM, Doug Renwick wrote:
> Have a new K3S and need to find the best settings.
> What are people using for their SSB and CW RX EQ 8 band settings.
> Same for the SSB Lo and Hi cut points.
> What seems to be the best NR settings.
>