[Elecraft] Best Coax for Jumpers and Interconnections for SO2R operation with K3 & KX3

[Wes (N7WS)]

Look into Ecoflex. http://www.vibroplex.com/contents/en-us/d39.html

I'm using it from the gear in the shack through the wall --> Andrew Heliax to 
the base of the tower---> Ecoflex up the tower.

So far, so good.

I measured some Buryflex years ago for a friend who had 100' dropped shipped to 
me.  It's in the storage room someplace and not in my antenna system.


On 2/23/2016 2:41 PM, Robert Nobis wrote:
> Jim,
>
> Thank you. I have heard of Davis RF BuryFlex, but have not seen it offered by any of the on-line sellers. I assume you purchase direct from the supplier? I concur with using Amphenol connectors.
>
> Thank you.
>
> 73,
>
>
> Bob Nobis - N7RJN
> n7rjn at nobis.net
>
>
>> On Feb 23, 2016, at 11:10, Jim Brown <jim at audiosystemsgroup.com> wrote:
>>
>> On Tue,2/23/2016 9:05 AM, Robert Nobis wrote:
>>> I am in the process of setting up my shack for SO2R operation with my K3 and KX3.  Just wondering what the best coax type to use for jumpers and interconnections within the shack?  I want to make sure I have the best possible isolation between the two rigs.
>> Faced with exactly that issue, I chose Davis RF BuryFlex as the best compromise between shielding effectiveness and flexibility. I use only Amphenol 83-1SP connectors that I carefully solder myself. And I use only Amphenol adapters where required (elbows, barrels, Tees). When a male N-connector is required, I use the excellent Andros connectors.
>>
>> 73, Jim K9YC
>>