[Elecraft] Best Coax for Jumpers and Interconnections for SO2R operation with K3 & KX3

[Robert Nobis]

Jim,

Thank you. I have heard of Davis RF BuryFlex, but have not seen it offered by any of the on-line sellers. I assume you purchase direct from the supplier? I concur with using Amphenol connectors. 

Thank you.

73,


Bob Nobis - N7RJN
n7rjn at nobis.net


> On Feb 23, 2016, at 11:10, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
> On Tue,2/23/2016 9:05 AM, Robert Nobis wrote:
>> I am in the process of setting up my shack for SO2R operation with my K3 and KX3.  Just wondering what the best coax type to use for jumpers and interconnections within the shack?  I want to make sure I have the best possible isolation between the two rigs.
> 
> Faced with exactly that issue, I chose Davis RF BuryFlex as the best compromise between shielding effectiveness and flexibility. I use only Amphenol 83-1SP connectors that I carefully solder myself. And I use only Amphenol adapters where required (elbows, barrels, Tees). When a male N-connector is required, I use the excellent Andros connectors.
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7rjn at nobis.net
>