[Elecraft] KX3 VFO B Tuning rate?

[Wayne Burdick]

VFO B tunes at the same rate as VFO A for a given mode. Assuming you're not using cross-mode, then you can just change the rate for A, and the rate for B will be the same.

Normal tuning rate is 10 Hz per step. Tapping RATE switches to 1-Hz tuning. Holding KHZ switches to coarse tuning. All will apply to both VFOs.

To change the coarse tuning rate for a give mode, use MENU:VFO CRS.

To change the total steps per VFO knob rotation, use MENU:VFO CTS (128 or 256 counts per turn).

73,
Wayne
N6KR

On Feb 23, 2016, at 9:15 AM, "Tim Cook" <nz8j at woh.rr.com> wrote:

> Is there any way to change the tuning rate for VFO B?  Using the dual watch
> mode and trying to find where the dx is listening using VFO B is a little
> difficult with such a slow tuning rate. I checked the manual and reflector
> archives but cannot locate any information about changing the tuning rate,
> maybe it's fixed at the 70hz per turn for VFO B. (at least that's what my
> KX3 does). The other possibility is that I'm completely missing the boat on
> this and am just not seeing it. 
> 
> 
> 
> Thanks
> 
> Tim
> 
> NZ8J.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com