[Elecraft] K3 transverter using 14 MHz I.F. - upper freq limit ?

[Don Wilhelm]

David,

I don't know if the K3 transverter IF output is limited to the ham bands 
or not.  However, if it is, contact Elecraft report and they may be 
willing to send you a program to run which will open up the transmit limits.
Be aware that the ham band bandpass filters may limit the power output 
as well as the receive passband.  You may want to install the KBPF3 if 
you do not already have one in your K3

73,
Don W3FPR

On 2/22/2016 4:09 PM, David Anderson wrote:
> I am thinking about a K3 for transverting to 144-146MHz using my existing transverter which has a 14-16MHz I.F.
>
> It works well with the KX3,  does the K3 similarly allow transmit and receive on the transverter ports beyond the ham band frequency limits? I don't want to be limited to 144.350 MHz upper frequency.
>
>