[Elecraft] K3 & Txmon Connection

[Deane Walkington]

I have recently installed  the Txmon and have seen some peculiar Power and
SWR readings on the P3 Display.  Power levels much higher than the K3 is set
to and SWR readings much higher (10:1) than the K3  indicates (typically
1.2:1).  I connected  the Coupler to the K3 ANT 1 socket via a short coax
patch cable.  What is the preferred method of connecting the Coupler - a UHF
male to male adaptor or a short length of coax?    At present I have
disconnected the coupler from the radio and the P3.

 

Dean

VK1DW