[Elecraft] K3/K3S 10W models with KXPA100

[Ron D'Eau Claire]

It works very well with just about any QRP rig. Complete instructions for
use with rigs other than the KX3 are included in the Owner's manual,
available from the Elecraft web site here:

http://www.elecraft.com/manual/E740199%20KXPA100%20Owner's%20Manual%20Rev%20
A5.pdf

It will work well even with QRP rigs that do not have a key line to enable
the amp. The amp will sense the presence of RF drive and switch to transmit
automatically. 

73, Ron AC7AC



-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
lstavenhagen
Sent: Saturday, February 20, 2016 6:25 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3/K3S 10W models with KXPA100

Hi all,
May be a bit silly of a question, but how well does the KXPA 100 work with
the K3 or K3S 10W model? Reason I ask is I now have 3 10W rigs (K3, K3S and
a K2) and may be building a 4th soon (another K2/10). And in the very rare
event when do go QRO, it would probably be cheaper to just get one 100W amp
to use with them all than 4 100W amp modules for each.

So my idea is a KXPA100 for my QRO ops with each one. So just curious how
well this amp works with the K3 and K3S? I would imagine it'd be similar to
using it with the K2 or ?

Thanks,
LS
W5QD



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-K3S-10W-models-with-KXPA100-tp761436
4.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com