[Elecraft] Amp or tuner / Chicken or Egg

[Ron D'Eau Claire]

They're independent. Since the KAT3 tuner is just a plug-in, I'd suggest
installing it and the KPA3 shield first (do everything in the KPA3
instructions down to "Installing the KPAIO3A Interface Module"), since the
both require more mechanical disassembly. Put everything back except for the
K3 top cover and check out the KAT3 at 10 watts (don't forget to enable the
KAT3 as described on the last page of the installation instructions!). 

Then it's a matter of replacing the blank panel on the K3 with the fans and
then plugging in the KIO3A and KPA3 100 watt amp modules and testing and
enabling them. 

73 Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gary
Smith
Sent: Wednesday, February 17, 2016 1:12 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Amp or tuner / Chicken or Egg

Just got my factory assembled K3s/10 delivered. I need to install the 100W
amp and internal tuner. Seems like I'd want to install the amp first. 

Yes?

Thanks & 73,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ron at elecraft.com