[Elecraft] P3 Span settings

[Grant Youngman]

You could --

Tune up 1/2 of your span width (in your example up 2.5 kHz). Press "CENTER" on the P3. That would put your desired DX signal at the left edge of the display and the mayhem out to the right. 

I'm unaware of any way to do this directly in the current firmware. 

Grant NQ5T

Sent from my iPhone

> On Feb 17, 2016, at 12:04 PM, a45wg <a45wg at sy-edm.com> wrote:
> 
> Fellow Hams,
>        Having spent the last 2 days playing with the P3 (very impressed) - and eventually figuring out how to get the Function keys to do something (Not well explained in the Manual IMHO), I’ve got some Macro’s working - So next job - in the P3 Display is there any way only to get the P3 Read The “Positive side” of the Span.
> 
> Say we have a DX transmitting on 28.030 Mhz …. If I set a Span of 2.5 Khz - I see in the P3 28.0275 to 28.0325 - a SPAN of 5Khz, +/- 2.5 Khz …. I get that. Very useful for looking for DX in a wideband mode.
> 
> Is there anyway I can only limit the span to be 28.030 - 28.0325 i.e. just the positive side of the span.
> 
> Despite some rather strange DX expedition splits recently (not mentioning a CW split of +7.5 Khz) I do not think  any DX expeditions are using negative splits (Please, please do not start)
> 
> Any advice/guidance would be greatly appreciated. I am sure I can do this in a Software I/Q SDR process - but I am really only trying to do this from the P3.
> 
> Regards
> 
>   Tim
>      A45WG
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nq5t at tx.rr.com