[Elecraft] K3s Odd sound vibrations - Hypothesis, Steps, Conclusion, and Request.

[Vic Rosenthal 4X6GP/K2VCO]

Why use adhesive (which I suspect Elecraft will tell you not to do)? You 
can probably solve the problem by shimming the core with a piece of soft 
plastic or foam, or putting a piece of tape under it.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 17 Feb 2016 05:54, Jerry Moore wrote:
> I resent the original and added a step. I get the buzzing with the monitor
> down low. Increasing the level allows me the ability to better isolate and
> hear it.
> If you remove the screws from the top cover and hold it in your hand there
> is no buzzing or distortion at any monitor level, or volume level. The
> harmonic distortion appears to be completely and easily resolvable but I
> need an approved adhesive to use. I'm not messing up my nice radio without
> support and approval from the manf.
>
> Jerry Moore
> CDXA, INDEXA, SKCC, Fists
> AE4PB, K3S - S.N. 010324
> http://www.qrz.com/db/AE4PB
> An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
> Patriotic.