[Elecraft] Pigtails on ANT1 and ANT2 UHF Bulkhead Connectors

[Ken G Kopp]

Morse Express sells kits with an SO-239 sized mounting plate, hardware and
a female BNC connector to do just what you're proposing.  It's a trivial
matter to unsolder the short jumper wire with the pin from the SO-239 and
move it to the BNC.

All the antenna connectors on my K3 and
wattmeter ... even my Bird ... are BNC's.

73

K0PP
On Feb 16, 2016 20:00, "Clay Autery" <cautery at montac.com> wrote:

> I've decided to replace the SO-239 bulkhead connectors for ANT1 and ANT2
> with N-Connectors, but I don't want to de-solder the pigtails from the
> stock UHF connectors.
>
> So I need to source new pigtails...
>
> Does anyone know what the specs are for the pigtails?  What is that
> little male pin called that plugs into the PCB, and what type/gauge wire
> is used?
>
> (I know, I know... I don't NEED N-Connectors at HF-6M, but I want to
> standardize on N-connectors and BNC throughout my shack.)
>
> ______________________
> Clay Autery, KG5LKV
> (318) 518-1389
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kengkopp at gmail.com
>