[Elecraft] CW-Skimmer Frequency Offset

[Arie Kleingeld PA3A]

Hajo,

Whatever you do, the skimmer screen shows on the screen what it is 
'listening to'. So set the offset in the settings of skimmer so that 
skimmer shows you what you hear in the KX3.
(I use the K3 with a real softrock and I can adjust the offset right on 
the spot.)

Arie PA3A

Op 16-2-2016 om 14:33 schreef Hajo Dezelski:
> Oh I forgot:
>
> I use the Softrock-IF as Radio (model).
>
> ​73 de
>
> Hajo
> ​ DL1SDZ​
>
>
> ---
> Cela est bien dit, mais il faut cultiver notre jardin.
>
> On Tue, Feb 16, 2016 at 1:08 PM, Hajo Dezelski <dl1sdz at gmail.com> wrote:
>
>> Hello,
>>
>> using the Kx3 with CW skimmer and Aggregator 4.1 I got a message from RBN
>> " RBN calculated frequency offset has a maximum value of 1.6 kHz on 20
>> meters. Please calibrate your skimmer to reduce this offset to a value
>> between -0.1 and -0.1 KHz."
>> When I change the mode on the Kx3 from cw to usb the difference is reduced
>> to 1,0 khz.
>>
>> Which mode should I use to be right on the frequency?
>>
>> Or should I change within skimmer the Audio IF to -1600 Hz. and use CW. My
>> frequency offset in cw is 600 Hz.
>>
>> ​Thanks for your advice​
>>
>> ​73 de​
>>
>> Hajo
>> ​ DL1SDZ​
>>
>>
>> ---
>> Cela est bien dit, mais il faut cultiver notre jardin.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa3a at xs4all.nl