[Elecraft] RTTY, Terminal and ALC questions

[Don Wilhelm]

Paul,

The ALC bars is not relevant when using FSK D (or PSK D), that is only 
for soundcard driven data modes.

K3 Terminal is there for convenience, and while is does the job, it was 
not intended to be a "logger", so no serial number incrementing is possible.

For FSK D, take a look at MMTTY - it can do both soundcard AFSK A and 
FSK D if you build a "one transistor keying device" to 'wiggle' the FSK 
IN pin on the K3 ACC connector.

73,
Don W3FPR

On 2/13/2016 10:01 AM, Peter Pauly wrote:
> I'm using the K3 Terminal and FSK D mode for the RTTY contest and am doing
> "okay" but have the following questions:
>
> 1. My ALC indicator shows 6 or 7 bars, more than I would like. Is there any
> way to adjust the output in FSK D mode?
>
> 2.  In the K3 Terminal, is there any way to have an incrementing serial
> number (required in this contest)?
>
> I usually use FLDigi which has that feature with AFSK, but I'm trying to
> get the hang of FSK-D.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>