[Elecraft] RTTY No Audio into K3S

[Irwin Darack]

Thanks  to everyone. Simple Operator error. I forgot to set the mic to Lin
in for TX Data. That solved it.

Irwin KD3TB

On Friday, February 12, 2016, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:

> You do have the speaker level at about 50% on the computer.  In the
> Windows 10 system I run,  I right click on the speaker symbol in the tray,
> then select Playback devices, then Speakers CODEC, the Properties then
> Levels.  The slider is sitting about mid scale or -10.2 dB or 50%.    The
> radio is in Data A mode.   I set the MIC {actually Line level} to about
> 20.  This gets me 4 to 5 bars on the ALC scale.   Then set the PWR value
> for the number of watts you want out.
>
> Nothing is plugged in the rear panel audio connectors.  I only use the USB
> cable between the radio and computer.
>
> 73
> Bob, K4TAX
>
> On 2/12/2016 4:40 PM, Irwin Darack wrote:
>
>> I am in the process of setting up a second K3S that I just built and
>> having
>> difficulties setting up RTTY using MMTTY
>>
>> Using the USB Codec, I can key the rig, receive Audio in and copy RTTY,
>> but
>> no Audio from the computer to the radio.
>>
>> I have the correct speaker in the computer selected (USB Audio Codec) . In
>> the Config menu I show KIO3B and set to nor.
>>
>> What am I missing - Not sure what to try next?
>>
>> Thanks,
>>
>> Irwin KD3TB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>>
>>
>
>

-- 
Irwin KD3TB