[Elecraft] 12 meter K3 RFI from nearby FM station

[Phil Kane]

On 2/10/2016 7:19 AM, Vic Rosenthal 4X6GP/K2VCO wrote:

> You would need a low-pass filter in your case. Make sure it can handle
> 100w, because you must connect it in the main antenna path -- the RX
> in/out path is before the T/R switch.

Using a low-pass filter on the output of an HF transmitter/transceiver
should be Job Number One - then again, I'm from the old school where
preventing Tennessee Valley Indians (TVI) was a real problem that hams
were concerned about.

73 de K2ASP - Phil Kane
Elecraft K2/100   s/n 5402

>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon