[Elecraft] help with improving transmit eq

[Bob McGraw K4TAX]

It just could be a mike issue that EQ won't correct.  Otherwise, the 
values should show positive or + amounts starting with about 200 Hz.  
You might also check to see the previous owner had not set other values.

73
Bob, K4TAX
K3S s/n 10163



On 2/3/2016 12:09 AM, Steve Wilson via Elecraft wrote:
> Hi all,
> I have a newly acquired slightly used K3.  Feedback on my voice audio quality is that it sounds tinny with no low or mid range.  Unfortunately, the K3 manual really doesn't provide much guidance on how to adjust the transmit EQ other than the mechanics of what buttons to push.  If I need to increase the low and mid, does this mean I should increase the values of the first half of the 8 settings and decrease the second half..or something similar?  It's been a while since I've dealt with audio equalizers.  I would appreciate any suggestions.
> Thanks, Steve  KG6HJU
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net