[Elecraft] PX3 Display Help

[James Bennett]

Thanks guys - got it resolved. Thanks for all the correct answers!

Jim Bennett / W6JHB
Folsom, CA

> On Dec 28, 2016, at 6:20 PM, Nr4c <nr4c at widomaker.com> wrote:
> 
> You pressed and held the Menu button to display F-Key labels and you have not created any. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Dec 27, 2016, at 5:43 PM, James Bennett <w6jhb at me.com> wrote:
>> 
>> Once again, the brain has abandoned me. On my PX3, the white outlined box that shows signals on the top part and waterfall on the bottom is only occupying about 2/3 of the glass screen. What I mean is that the bottom of the white outline does not come all the way down to the bottom of the glass area. The top area containing signals and waterfall occupy just under 1-1/2 inches, and the rest (underneath, about 3/4 inch) is black. What have I done that has caused me to loose 1/3 of my PX3 display? If I adjust the “Waterfall” value in the menu, it varies the amount of the display the waterfall takes up, but it does not affect that bottom line.
>> 
>> I’ve looked through the Menu entries several times but don’t see anything that jumps out and says “adjust display height” or something like that.
>> 
>> Any help would be greatly appreciated!
>> 
>> Tnx, Jim / W6JHB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
>