[Elecraft] SVGA monitor for P3

tomb18 tomb18 at videotron.ca
Wed Dec 28 11:25:26 EST 2016


HiAbout the only option for a USB capture device for VGA these days is an Epiphan AV.IO HD. It will use a USB 2 interface but 1920x1080 is unlikely to work very well mainly because the refresh rate at 1920x1080 appears a bit too slow. Other resolutoons are fine. These options are expensive.There is one pcie board also available from  StarTech and they also have a USB 3 device as well. Again expensive.The cheapest option is to find a used avermedia hd game broadcaster or Epiphan vga2usb on ebay.All these options will work with Win4k3 and give full mouse poimt and click control as long as you have a 64 bit operating system.There would be many more inexpensive capture devices if the svga was updated to hdmi.73 Tom 



Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Jeff Griffin <kb2m at arrl.net> Date: 2016-12-28  9:48 AM  (GMT-05:00) To: 'Elecraft Reflector' <elecraft at mailman.qth.net> Subject: Re: [Elecraft] SVGA monitor for P3 
I recently received a P3SVGA as a Christmas present and would like to redirect its SVGA 1920 by 1080 output fully to an existing PC's monitor as a scalable window via a USB 2.0 port. Anyone doing this please share what hardware and software your using to accomplish this. Thanks in advance...

73 Jeff kb2m 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Harry Yingst via Elecraft
Sent: Tuesday, December 27, 2016 7:29 PM
To: Carl Yaffey; Mel Farrer via Elecraft
Subject: Re: [Elecraft] SVGA monitor for P3


I run 3 monitors on my computer and instead of dedicating a monitor to the P3's SVGA card I useda VGA Capture card that way I can put it in a window on my desktop and resize or move it around.




      From: Carl Yaffey <cyaffey at gmail.com>
 To: Mel Farrer via Elecraft <elecraft at mailman.qth.net> 
 Sent: Tuesday, December 27, 2016 7:03 PM
 Subject: [Elecraft] SVGA monitor for P3
   
Looking for recommendations for an SVGA monitor to work with the P3.

Carl Yaffey  K8NU
Recording studio.
cyaffeyNO_SPAM at gmail.com 
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com


   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kb2m at arrl.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca


More information about the Elecraft mailing list