[Elecraft] RemoteRig Microphone Question

[Mitch Wolfson, DJØQN / K7DX]

Jim,

Is the Heil plugged into the rear, or the front? If in the rea, then you 
must first unplug the RRC to prevent a remote connect, then switch the 
audio to the rear jack. If you leave the RRC's connected, you will only 
change the remote K3 and not the control K3.

73,
Mitch DJ0QN / K7DX

Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436

On 26.12.2016 20:27, Jim Larson wrote:
> I have a K3S connected to a remote K3 using the RemoteRig boxes.  With the MH2 hand mic everything works great, but with my new Heil ProSet with the iC element (purchased from Elecraft), I do not get any transmit audio at all.  Running the ProSet into the local K3S (no RemoteRig), I am getting audio out, so I know the headset is fine.
>
> Is there a configuration change that needs to be made on the RemoteRig to work with this ProSet iC element?
>
> Thanks, Jim - KK7A
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dj0qn at arrl.net
>