[Elecraft] CW macro for K-pod

[Cady, Fred]

Hi Mike,

You can use the KY command to do that.

Use the K3 Utility to program separate macros with:

KY VE3WDM;

KY 599 CA;

KY TU;

Write them to the K3.

Then use the KPod buttons to send.

You can't send an increasing number for a report although if you have a P3 with SVGA you could.

73,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>

(Macro programming book coming)


________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Mike Weir <ve3wdm at hotmail.com>
Sent: Friday, December 23, 2016 12:17 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] CW macro for K-pod

Good afternoon all, here is what I want to do.............I have the K-pod and I wanted to set up some of the F buttons to send CW contest replies such as:

My call

TU

Contest exchange and if possible an increasing serial exchange

Just not sure how to set all this up?

Thanks in advance

Mike

VE3WDM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu