[Elecraft] Checking VFO accuracy using WWV

[Walter Underwood]

For the KXPA100, the tolerance is specified. See page 30 of the manual.

"Power Output: Max.100 watts at 13.8 V, 1.8 to 29.7 MHz and 80 watts 50-54 MHz PEP CW/SSB/DATA, ± 1 dB“

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Dec 18, 2016, at 9:22 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
> On Sun,12/18/2016 2:04 PM, Wes Stewart wrote:
>> If the manufacturer specifies that the transmitter puts out 100W, and indeed uses that as a part of the part number on the order sheet, then it's not unreasonable for the customer to expect 100 W out. 
> 
> The published spec is 100W typical, with no tolerance specified.
> 
> 73, Jim K9YC
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org