[Elecraft] K3S No TX Audio via USB

[Nr4c]

You should be using DATA A mode for wsjt. 

Look in the manual for data modes. It works. 

Sent from my iPhone
...nr4c. bill


> On Dec 17, 2016, at 5:49 PM, John Klewer <n6axjohn at gmail.com> wrote:
> 
> OK....I have read several archived email threads regarding this issue some
> other hams are having without finding a resolution to my problem...please
> help!
> 
> Running a new K3S with a Mac running WSJT-x for JT-65 mode
> 
> Transceiver is connected per the manual and I am able to control the K3
> with my logging program (MacloggerDX) when it is so connected...in other
> words I have control and communications between the computer and the XCVR
> 
> WSJT-X receive works great and able to decode signals fine.
> 
> I have selected the appropriate USB CODEC as shown in my Mac system
> settings and, of course, in the WSJT-X configuration menu.
> 
> I have nothing plugged into the Line In or Line Out jacks of the K3S
> 
> There is no TX audio, listening to an external receiver or the radio's
> monitor regardless of setting and regardless of Mic Gain settings (running
> in USB mode for WSJT of course)
> 
> This is a brand new K3S with version 5.50 installed
> 
> My friend has the same setup except with a Windows computer and has the
> same problem with his setup.
> 
> Any help is appreciated
> 
> Thanks
> 
> John, N6AX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com