[Elecraft] K-POD Macro

[Cady, Fred]

As Don points out, you have to have the CONFIG:VFO IND set to yes (independent VFOs) to set different bands on different VFOs.


Cheers and 73,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>

(Macro Programming book coming soon)


________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Irwin Darack <idarack at gmail.com>
Sent: Tuesday, December 13, 2016 9:56 AM
To: donwilh at embarqmail.com; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K-POD Macro

I have had no luck in trying a variety of combinations using the Unlink
VFO, Split and Sub Band commands in the Macro. I know wonder if you can not
create a macro that sends VFO A to one band/frequency and VFO B to another
band/Frequency?

I am hoping that someone from Elecraft who is responsible for the Macro's
can help here before I spend too much more time on this project.

Thanks, Irwin KD3TB

On Mon, Dec 12, 2016 at 6:44 PM, Irwin Darack <idarack at gmail.com> wrote:

>
> On Mon, Dec 12, 2016 at 5:22 PM Don Wilhelm <donwilh at embarqmail.com>
> wrote:
>
>> Irwin,
>> Thanks, Irwin
>>
>>
>> My guess is that you do not have VFO IND turned ON in the menu.
>>
>> You are trying to set the VFOs to two different bands and that requires
>>
>> VFO INDependent.  See page 37 of the K3 manual for full disclosure.
>>
>>
>>
>> 73,
>>
>> Don W3FPR
>>
>>
>>
>> On 12/12/2016 5:07 PM, Irwin Darack wrote:
>>
>> > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B =
>> 15
>>
>> > Mhz.
>>
>> >
>>
>> > This sends VFO A to 20 Mhz:  FA00020000000;MD5;FB00015000000;BW0300;
>>
>> > But does not send VFO B to 15 Mhz
>>
>> >
>>
>> > What am I doing wrong here?
>>
>> >
>>
>> > Thanks,
>>
>> >
>>
>>


--
Irwin KD3TB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu