[Elecraft] P3 and Centering the Display

[Don Wilhelm]

I guess I don't understand what you want to accomplish.
If you want the VFO A to be in the center of the display, simply change 
the mode from FIXED to TRACKING.  That will keep the VFO frequency 
centered - no macros required.

73,
Don W3FPR

On 12/7/2016 6:54 PM, K5MWR via Elecraft wrote:
> Sean
>
> Apologies as I did not read your full post when I sent the earlier
> response.
>
> I too see the same type of response and need to execute an involved
> macro multiple times in order to get it to fully function.  Depends on
> what frequency/band and mode I am starting with.  I would like to have a
> macro to take me to a digital mode such as JT65 using something like below.
>
> BN03;FA00007076000;MD6;DT0;PC020;BW0400;FT0;SB0;SWH09;#MKA1;#MFA+00007077000;#MKB1;#MFB+00007078000;#SPN000050;#CTF+00007077750;
>
>
> My understanding is that the time to execute band or large frequency
> changes in indeterminate and that there is no simple pause command that
> can be inserted to allow the steps to complete.
> I also find that the inability to know what mode such as VOX/PTT you are
> in causes problems.  There was mention at one time that a VOX command
> was to be implemented but have not seen that.
>