[Elecraft] KX3 CW Decode

[Nr4c]

It seems you turned text decode to TX only. This will decode what you send with paddles (not hand key) but will not decode received stations. 

Sent from my iPhone
...nr4c. bill


> On Dec 6, 2016, at 3:45 PM, Aaron K5ATG <k5atg.aaron at gmail.com> wrote:
> 
> I am in the process of learning CW and I am having a little bit of issue
> with my KX3 on decoding CW. I am wanting it to be able to decode CW on TX
> only so I can work on sending. By pressing the DATA button I selected TX
> ONLY and I have the power setting at 0.0 watts into a dummy load. I am
> using the plug in paddles for the KX3. However it will not decode anything.
> I tuned to a strong signal and tried the different RX Thresholds and it
> would not decode anything there either. I am not sure if I have it set up
> right or I am missing a setting or something. Can anyone please help?
> 
> Thank you
> Aaron Scott K5ATG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com