[Elecraft] Help with remote side tone setup

[KE8G]

George,
That did the trick!   Thanks for helping me out.

73 de Jim - KE8G

Sent from my iPad

> On Dec 3, 2016, at 8:14 PM, George Kidder <gkidder at ilstu.edu> wrote:
> 
> The following answered my similar question:  The version I received was 5.53, and the monitor tone is back.
> 
> George, W3HBM
> 
> I believe this is corrected in the latest field-test firmware release (5.53) which I'll send you.
> 
> 73,
> Wayne
> N6KR
> 
> 
> On Sep 8, 2016, at 8:34 AM, Classe Bergman<classe.bergman at telia.com>  wrote:
> 
> Hi,
> Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed
> 5.50/2.87
> I then discovered that the CW Monitor audio was lost on Lin Out. First I
> tought  that some settings was messed up but could not find anything. I
> then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I
> found that if I change settings from LIN OUT = "Nor"as I normaly use  to
> "=Phones", the CW Monitor audio comes back. So something have changed the
> function of Line Out audio in the new FW release.
> Since all audio levels follows the Front AF vol  when using  "=Phones" this
> mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO
> board without USB interface
> 
> Is this a known bug ( or maybe a feature ..) ?
> 
> 73 Classe SM3GSK
> 
> 
>> On 12/3/2016 3:42 PM, Jim - KE8G wrote:
>> Hi All,
>> I am having a problem and I hope someone out there might be able to help me.
>> 
>> I am putting the final touches on setting up the station to operate remotely.  I have used this setup last year and it worked perfectly.  This year I am having a problem with receiving the CW side tone.
>> 
>> Here's the set up:
>> Both the remote & control PCs are running Win7 64 bit.
>> I am using a Webrelay to turn on the K3.
>> I am using TeamViewer to remote into the "remote" PC.
>> I am using Win4K3Suite to control the raido.
>> I am using N1mm+ for my logging/contesting, etc.
>> I use Skype on both computers to hear the audio from the K3 radio and see the P3 via webcam
>> 
>> On the control side, I can hear the background noise and stations and work (S7P and run) with no problem, just can't hear my side tone.
>> 
>> I come to the "remote" side, using N1MM+ for S&P and run, I can hear everything including the side tone.
>> 
>> For some reason, the side tone is not coming over to the control PC.
>> 
>> I think that's everything!
>> 
>> Any ideas?  Maybe a setting?  The Monitor level is set fine on the K3, so that's not the problem.
>> 
>> I contacted Tom, author of Win4K3Suite and he suggested I contact this group.
>> 
>> Thanks in advance,
>> 73 de Jim - KE8G
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to gkidder at ilstu.edu
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ke8g at cox.net