[Elecraft] KX3 and FLDIGI

[Kevin - K4VD]

John, that's exactly why I was asking about I/Q - to free up the phone jack
but a wide spectrum display would have been nice in fldigi.

Ask Barry suggests, keeping the I/Q jack open allows the use of CW Skimmer
(use it on my Flex, not on the KX3 yet) or Win4K3. I own win4k3 but not
fully using it yet. I'll slowly work into integrating other tools into a
package but each one does add it's own complexity to the mix.

73,
Kev K4VD

On Fri, Dec 2, 2016 at 5:01 PM, John Pitz <crustacean at brig-elec.com> wrote:

> There is also no harm in using IQ.  If you are jumping from digital to
> ssb you may not want to be continuously plugging and unplugging any more
> cables than necessary.
>
>
> On Fri, 2016-12-02 at 12:41 -0800, Walter Underwood wrote:
>
> > There is no advantage to using the I/Q output for fldigi. It only cares
> about one channel,
> > so use the regular audio output.
> >
> > wunder
> > K6WRU
> > Walter Underwood
> > CM87wj
> > http://observer.wunderwood.org/ (my blog)
> >
> > > On Dec 2, 2016, at 12:25 PM, Jim Brown <jim at audiosystemsgroup.com>
> wrote:
> > >
> > > On Fri,12/2/2016 12:15 PM, Don Wilhelm wrote:
> > >> Fldigi and other similar applications only use the left channel.
> > >
> > > Yes. MMTTY can be set to decode L or R, but only transmits Mono. 2Tone
> (an excellent RTTY program) can easily be set to RX and TX on L or R.
> WSJT-X can easily select L and R for both TX and RX, but WSJT10 is left
> channel only. Development of WSJT has shifted to WSJT-X, with more
> modulation schemes added to WSJT-X as time goes by, and it is intended to
> eventually replace WSJT10 for all modes. Before you fall in love with any
> digital mode software, check out its limitations in this regard.
> > >
> > > 73, Jim K9YC
> > >
> > > ______________________________________________________________
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > > Message delivered to wunder at wunderwood.org
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to crustacean at brig-elec.com
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kevin at k4vd.net
>