[Elecraft] KX3 and FLDIGI

[Barry]

Kevin,
     The simplest approach I found was to use a SignaLink USB plugged 
into the audiophones out. I then used an amplified computer speaker 
connected to the aux out of the SignaLink. This way I had to make no 
cable or wiring change to go to a digital mode, except to replace the 
mic with the cable FROM the signaLink. I could control audio levels very 
easily this way.

     You really want to leave the I&Q available for spectrum display and 
using CW Skimmer, if you use it; I do. You may want to look at Ham Radio 
Deluxe and Win4K3. This will allow some pretty slick station 
integration.

73,
Barry
K3NDM

------ Original Message ------
From: "Kevin - K4VD" <kevin at k4vd.net>
To:
Cc: "Elecraft Reflector Reflector" <elecraft at mailman.qth.net>
Sent: 12/2/2016 4:30:28 PM
Subject: Re: [Elecraft] KX3 and FLDIGI

>​OK - I got the answer concerning I/Q audio to fldigi. No advantage as
>fldigi does not process I/Q signals. Maybe I'll drop a feature request 
>on
>the fldigi forum. It would be nice to see a nice, wide swath of a band. 
>I
>know Win4K3​ and PX3 and maybe some other tools are available but I was
>kind of looking to simplify things. Fldigi seems to have most 
>everything
>wrapped into one package (many modes, logging, rig control, waterfall)
>except support for I/Q and wsjt modes. I'm trying to find that balance
>between having it all and reducing complexity. Figure that one out! :)
>
>Thanks again,
>Kevin K4VD
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net