[Elecraft] KX3 and FLDIGI

[Walter Underwood]

There is no advantage to using the I/Q output for fldigi. It only cares about one channel,
so use the regular audio output. 

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Dec 2, 2016, at 12:25 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
> On Fri,12/2/2016 12:15 PM, Don Wilhelm wrote:
>> Fldigi and other similar applications only use the left channel. 
> 
> Yes. MMTTY can be set to decode L or R, but only transmits Mono. 2Tone (an excellent RTTY program) can easily be set to RX and TX on L or R. WSJT-X can easily select L and R for both TX and RX, but WSJT10 is left channel only. Development of WSJT has shifted to WSJT-X, with more modulation schemes added to WSJT-X as time goes by, and it is intended to eventually replace WSJT10 for all modes. Before you fall in love with any digital mode software, check out its limitations in this regard.
> 
> 73, Jim K9YC
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org