[Elecraft] K2 Locked up

[Guy Olinger K2AV]

Hi, Aaron.

Does a tap on the Rate button change the tuning rate, e.g do the two digits
right of the decimal point on the display disappear and reappear with
successive taps to Rate? If the tap on the button doesn't change the
display, it would be a mechanical or electrical issue with the button or
its connections.

If the tap DOES change the display, then the button is working and CPU
behavior is at issue.

73, Guy K2AV

On Tue, Aug 30, 2016 at 1:45 PM, Aaron K5ATG <k5atg.aaron at gmail.com> wrote:

> I was running PSK on my K2 and my cat got up on my desk and started moving
> the VFO knob off frequency. So I decided to put on Lock and pushed the
> button until it told me that it was locked, everything was normal. Then I
> tried to unlock it and it would not work. I turned it off and restarted it
> and everything is still locked. I unplugged it and again it is still
> locked. The decimal point is not flashing. I looked in the K2 Manual and
> could not find a place where I could resolve the problem. Does anyone have
> any ideas?
> Thank you
> Aaron K5ATG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>