[Elecraft] W-2 Wattmeter software

[Mike va3mw]

Correct, but you do need the initial first com port to connect the W2 to the computer. Then you can do a client / server connection over IP. 

I've been doing it for years. 

Mike va3mw

> On Aug 28, 2016, at 9:25 PM, JOE <k1ike at snet.net> wrote:
> 
> Hi Bill,
> 
> The software has the capability of connecting to a com port as you described, but it also can be set up as a client.  In the client configuration it does not use the com port.  I'm using it in the client configuration.
> 
> 73, Joe, k1ike
> 
>> On 8/28/2016 9:04 PM, Bill wrote:
>> Pardon me.  It appeared to me the question, which was not not included in
>> your reply, was about making some setting changes to the watt meter, which
>> is part of the Utility and connected to a PC comm port.
>> 
>> Bill
>> K9YEQ
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net