[Elecraft] W-2 Wattmeter software

[Bill]

Try checking to be sure you have enabled an available comm port.

Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of JOE
Sent: Sunday, August 28, 2016 10:59 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] W-2 Wattmeter software

Hello to All,

I'm having trouble with connecting to the W-2 wattmeter with the Elecraft W2
Interface software available on the website using an internet connection.
The wattmeter is V1.00 software and the W-2 software is V1.12.1.18  The
error is "Looking for a W2 on Network".

I had this working in the past and now it has me stumped.  Using Putty
communication software I can connect to the remote W-2 and it responds with
V1.00 when I invoke the "V" command so I know the connection is good. Using
a direct connection to the W2 from the computer com port works fine.  I'm
using the factory cable that did work in the past.

The W2 Interface software is set up with Network (TCP/IP) checked, Client,
and the server IP and port that worked with Putty.

This has me stumped.  It has to be something simple that I am missing.

73, Joe, K1ike
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to k9yeq at live.com