[Elecraft] [KX3] assembly issue
Ken G Kopp
kengkopp at gmail.com
Tue Aug 23 12:41:22 EDT 2016
Hi Phil!
If it was me ... and I was about finished with the build ... I be looking
for a "local"
solution to a small problem rather than wait for Elecraft to respond ...
likely by mail ... and no new radio to enjoy for what would likely be days
of waiting.
K0PP
On Aug 23, 2016 10:23, "Phil Hystad" <phystad at mac.com> wrote:
> Why wouldn't a call to Elecraft support be the very first “solution”
> sought for
> this problem?
>
> 73, phil, K7PEH
>
>
> > On Aug 23, 2016, at 8:55 AM, Ken G Kopp <kengkopp at gmail.com> wrote:
> >
> > Staples and other such stores sell double-sided Scotch tape ... much
> > thinner than "carpet tape".
> >
> > 73
> >
> > K0PP
> >
> > On Aug 23, 2016 9:47 AM, "Bob" <K2TK at att.net> wrote:
> >
> >> Hi Jim,
> >>
> >> Check Lowe's or Home Depot. They will have some double sided
> >> tape. May call it carpet tape.
> >>
> >> 73,
> >>
> >> Bob
> >>
> >> K2TK
> >>
> >>
> >> On 8/23/2016 7:48 AM, Jim Spears wrote:
> >>
> >>> I am assembling KX3 s/n 9112 and have run into an interesting snag. On
> >>> page
> >>> 30 where I mount the shield onto the RF board, when I removed the
> >>> protective
> >>> back from the shield, all of the stickum came with it. Now there is
> not
> >>> enough stickum to hold the shield onto the RF board.
> >>>
> >>>
> >>> I need a safe work around. Elmer's glue?
> >>>
> >>>
> >>> Please reply directly as I get the digest and might not see the next
> >>> digest
> >>> until late today or tomorrow depending on message traffic load.
> >>>
> >>>
> >>> Jim/N1NK
> >>>
> >>> N1NK at cox.net
> >>>
> >>>
> >>>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to kengkopp at gmail.com
> >>
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to phystad at mac.com
>
>
More information about the Elecraft
mailing list