[Elecraft] Prioritizing CAT control?

[Don Wilhelm]

Ken,

I am not sure what you mean by "#1" and "#8" - I can guess, but I don't 
have enough information to know what you mean.

Look at the XVn menu items in the K3S manual listing of the menu 
functions.  There are two that will affect the selection of the proper 
transverter - 1) XVn ON, and 2) XVn ADR.  Be certain both are set 
correctly for each transverter.

What I am saying is that even though you may call the external 
transverter #8, it is the XVn ADR that does the selection of the 
transverter - note that the band selection (address) information must be 
set to match the addressing of that decoded by the transverter.

73,
Don W3FPR

On 8/22/2016 11:35 AM, Ken Arck wrote:
> I've been using an external xvtr with my K3s for a while now and over 
> the weekend, I installed the internal K144XV one. The internal is set 
> as #1 and the external is set as #8 (the external has always been 
> defined as #8).
>
> Now I notice that CAT control (to change the freq) calls #1 and not #8 
> as I want. Is it a matter of the "first one in line" - based on 
> frequency - is the one called or can I change something in CONFIG to 
> select which xvtr is set?
>