[Elecraft] partial K line es Microkeyer integration

[Joe Subich, W4TV]

On 8/20/2016 3:58 PM, knowkode at verizon.net wrote:
 > I'm sure this has been asked and answered many times but I could not
 > find search results specific to my plans.

Yes, this has been answered many times.

You will need the Elecraft 15 pin "Y" cable for the ACC jack (in order
to connect FSK).  In addition, you should *not* use the KUSB.  Instead,
connect and configure the K3S/P3 for *RS232* as documented in the K3S
Owners Manual (page 19) and connect the RS-232 plug from the MK II to
the P3 "PC" jack.

73,

   ... Joe, W4TV


On 8/20/2016 3:58 PM, knowkode at verizon.net wrote:
> I'm sure this has been asked and answered many times but I could not
> find search results specific to my plans. Question is, do I need a
> pair of Y cables to add my microKeyer II to my K3 and KPA500? The K3
> and KPA500 are connected to each other with a KPAK3AUX cable. The
> radio and amp are connected to the computer with KUSB cables. Plans
> are to demo Win4K3 for rig control and panadapter display for an
> SDRplay.
>
> Tnx, Jim W5QM
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> lists at subich.com
>