[Elecraft] Need Shorter KX-3 to KXPA-100 Cables

[Clay Autery]

I make my own cables...  Not sure about what cables you need for a KX-3,
but I haven't found a cable I couldn't make...

The stock cables SHOULD work fine, but you need to have a chassis bond
between EACH pair of equipment pieces that are joined by an unbalanced
cable whether the cable is shielded or not...

Shorter is generally better. Bigger conductors are generally better... 
twisted pair conductors (if paired correctly) is almost ALWAYS better...

Of course, custom made cables at the exact length required always makes
things look nicer... :-)

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 8/18/2016 9:16 PM, BillP wrote:
> When using the KXPA-100 with the KX-3 my portable station is a mess of Elecraft cables prone to RFI, is there a source for shorter cables?  I find 12-24 inches is plenty for interconnecting cables for portable and many mobile sets.   Thanks ... Bill K6ACJ
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cautery at montac.com