[Elecraft] KAT500 Remote and KPA500 Remote

[Jim Cary]

Ken,

Sorry, but you have completely lost me there I am not up on terminology (someone should write a good book on basic terminology!).

In my simple language, I’ll have PC’s at both ends, with the remote PC connected with the appropriate cable to each of the units and the software programs running on the control PC.  Obviously each PC will be connected to a router.  Does this help?

Jim
W2SM

> On Aug 16, 2016, at 5:26 PM, Ken K6MR <k6mr at arrl.net> wrote:
> 
> Setup depends on your physical connection. Are you controlling only a serial port or doing client/server via tcp/ip?
>  
> Ken K6MR
>  
>  
>  
> From: Jim Cary <mailto:jimlcary at gmail.com>
> Sent: Tuesday, August 16, 2016 14:22
> To: elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net>
> Subject: [Elecraft] KAT500 Remote and KPA500 Remote
>  
> I have downloaded the above software from the Elecraft website to remotely control my KAT500 and KPA500.  However, their are no setup instructions included and Elecraft does not have them since the software came from a third party.
> 
> If anyone has the setup information, I would greatly appreciate it.
> 
> Thanks,
> 
> Jim Cary
> W2SM
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
> Message delivered to k6mr at outlook.com <mailto:k6mr at outlook.com>