[Elecraft] P3 TXMonitor sometimes displays during receive

[David F. Reed]

Happy to report after extensive testing, that your suggestion was the 
effective fix I had hoped for.  Thank you sir!

73 de Dave, W5SV

On 8/12/2016 03:49, David F. Reed wrote:
> Howard,
>
> thanks for the idea; I now have things set as you suggest. Because it 
> was intermittent it may take a while to know if its "fixed" or not, so 
> I will report back after more testing.  Thanks again for the idea.
>
> 73 de Dave, W5SV
>
> On 8/12/2016 01:48, Howard Stephenson wrote:
>> Dave,
>>
>> Try this from P3 MCU 1.60 / SVGA 1.34 / March 21, 2016  release notes:
>>
>> Enable/disable TX sensing at the TxMon coupler: Added TxSensEn to TxMon
>> sub-menu. This allows enabling/disabling of transmit sensing at the
>> coupler. For K3 and K3S users, TxSensEn can be set to “disabled”, which
>> will use the serial connection from the K3 to determine the TX state.
>> Setting TxSensEn to “enabled” will use forward power sensed at the TxMon
>> coupler to determine TX state (useful for non-Elecraft radios).
>>
>> 73
>> Howard Stephenson K6IA
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w5sv.dave at gmail.com
>