[Elecraft] P3 TXMonitor sometimes displays during receive

[David F. Reed]

Howard,

thanks for the idea; I now have things set as you suggest. Because it 
was intermittent it may take a while to know if its "fixed" or not, so I 
will report back after more testing.  Thanks again for the idea.

73 de Dave, W5SV

On 8/12/2016 01:48, Howard Stephenson wrote:
> Dave,
>
> Try this from P3 MCU 1.60 / SVGA 1.34 / March 21, 2016  release notes:
>
> Enable/disable TX sensing at the TxMon coupler: Added TxSensEn to TxMon
> sub-menu. This allows enabling/disabling of transmit sensing at the
> coupler. For K3 and K3S users, TxSensEn can be set to “disabled”, which
> will use the serial connection from the K3 to determine the TX state.
> Setting TxSensEn to “enabled” will use forward power sensed at the TxMon
> coupler to determine TX state (useful for non-Elecraft radios).
>
> 73
> Howard Stephenson K6IA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w5sv.dave at gmail.com