[Elecraft] KXPA100 Amp Issue

[Don Wilhelm]

Jim,

ANT1/ANT2 is a per band setting.  If you have not set the antenna port 
to the antenna you are using, then the antenna selected could be random.

Go to each band and set the antenna to whichever antenna is connected, 
then test the behavior by switching from band to band.

If you bought the KXAT100 and KX3 used, the prior owner may have had 
specific antenna selections set per band - if you bought it new, it may 
just be a matter of initializing things.

73,
Don W3FPR

On 8/11/2016 7:32 PM, Jim via Elecraft wrote:
> My KXPA 100 is switching from antenna 1 to antenna 2 on its own when I go from band to band on the KX3.  Anybody know what could be causing this?  Also, I only have one antenna.
> Thanks,JimW7JHR
>
>