[Elecraft] 60 metre issue

[Don Wilhelm]

Alan,

Contact K3support at elecraft.com and they should be able to help you with 
it.  There is firmware to change the band edges.  Run it once and it is 
done.

73,
Don W3FPR

On 8/11/2016 2:07 PM, G4GNX wrote:
> Further to my messing about with tuners, I've just discovered that the 
> K3 will not allow me to tune an antenna below about 5.350MHz which 
> appears to be the band edge in the USA.
> In the UK, we're allowed to use 60M down to 5.258MHz, so it would be 
> helpful to be able to tune the TX down to that. I've not tried to 
> transmit voice or CW, but I assume the K3 won't allow that either?
> Does anyone know of a way to persuade the K3 where the UK band edges 
> are? I've perused the manuals and can only find a reference to 
> eliminating the entire band from the band list.
>
> 73,
>
> Alan. G4GNX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>