[Elecraft] KPA500 Band Tracking

[Barry Simpson]

Hi Edward

I am buying into this thread somewhat late. However, I did not see a
particular suggestion which has previously caused me similar problems.

Have you, inadvertently or otherwise, changed the "radio" setting in the
KPA500 menu?  It should be set as K3. If it isn't, you will get some
strange effects.

I also had a problem when the K3 to KPA500 suffered a broken conductor.

So it could be either.

The new leads from Elecraft are much better and more flexible than the ones
originally available when the KPA500 first came out.

73

Barry  VK2BJ

On 8 August 2016 at 10:21, Dauer, Edward <edauer at law.du.edu> wrote:

> I appreciate your having written, Cliff; and it is the case that 30 meters
> is an oddball.  Just as the K3 is booby-trapped to prevent transmitting out
> of band, it could very well have been that adding 30 meters to the working
> bands would have required some special consideration to keep the amp from
> violating the power limitations.
>
> Thanks again,
>
> Ted, KN1CBR
>
>
> On 8/7/16, 6:10 PM, "Cliff Frescura" <cf at cfcorp.com> wrote:
>
>     I think I jumped the gun and was wrong.
>
>     73,
>
>     Cliff K3LL/6
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk2bj at optusnet.com.au
>