[Elecraft] Turn on KAT500?

[Don Wilhelm]

Dave,

Check the ACC cable at the K3 end.  I suspect one of the wires in the 
transverter control cable is touching the DE-15HD connector pin 8 
(Remote Power ON).

73,
Don W3FPR

On 8/6/2016 12:26 PM, Dave Fugleberg wrote:
> Still trying to sort out my transverter problem - see my first post on that
> today. I have only the transverters connected to the K3. When I connect
> power to the rig runner, the k3 tried to power on by itself and displays
> 'turn on KAT 500'. I don't even have one, but I do have a P3, which is not
> connected at this point.
> I vaguely recall seeing that message when I first got my P3, and finding a
> solution, I don't remember what it was.
>