[Elecraft] Trying wspr again with signalink and K3

[Bill Frantz]

I use VOX for all digital modes. I started with a SignaLink, 
moved to a Tascam unit, and now I am using the KIO3B upgrade to 
the K3 to give it a USB port.

VOX will work fine with any digital mode that does not vary the 
sound volume as a modulation technique. (I think all the common 
ones use full modulation all the time, but there are so many 
digital modes, someone may be trying amplitude changes to get 
another bit per baud.)

In any case, the VOX works reasonably well. My only complaint is 
I have to switch it off for voice modes.

73 Bill AE6JV

On 8/4/16 at 6:16 PM, bw_dw at fastmail.fm (dw) wrote:

>Is anyone using the Signalink USB with WSPR, and perhaps could share
>your PTT method and CAT setting and perhaps K3 settings?

-----------------------------------------------------------------------
Bill Frantz        |The nice thing about standards| Periwinkle
(408)356-8506      |is there are so many to choose| 16345 
Englewood Ave
www.pwpconsult.com |from.   - Andrew Tanenbaum    | Los Gatos, 
CA 95032