[Elecraft] [KX3] KX3-> KXPA100=> KPA500 ... Can it be done?

[Don Wilhelm]

KX3 to KXPA100 connections are covered well in the KXPA100 manual.  
Download from Elecraft if you do not yet have that manual.

Connecting the KPA500 to the KXPA100 requires a cable from the KXPA100 
PA KEY to the KPA500 PA KEY connector.  Of course, you would also 
connect the coax, but that should be obvious.

The KPA500 would sense the RF and switch to the correct band - or you 
could select the band on the front panel.

73,
Don W3FPR

On 8/4/2016 1:13 AM, 'David F. Reed' w5sv.dave at gmail.com [KX3] wrote:
>
> Looking for a little QRO in my alternate station...
>
> I would like to be able to run my KX3 into my KXPA100 amplifier, and 
> that into my KPA500 amp.
>
> How do I do that?
>
>